 |
Type
607
Sizes - 1/4", 3/8"
End connections - Spigot for solvent and fustion welding, NPT
threaded sockets
Body Material - PVC, PP, PVDF, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM
Pressure(PSI) - 0-90
|
 |
Type
617
Sizes - 3/8", 1/2"
End connections - True union, plain socket, threaded, flare connections(HP),
BCF(HP)
Body Material - PVC, PP, PVDF, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM
Pressure(PSI) - 0-90
|
 |
Type
677
Sizes - 1/2" - 4"
End connections - True union, spigot, IPS threaded or socket,
Flanges ANSI
Body Material - PVC, PP, PVDF, NPP, CPVC, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM, CSM, NBR
Pressure(PSI) - 0-150
|
|
*HP-Packaged
and assembled in a Class 100 Clean Room Environment. All end
connections are capped. |
 |
Type
600 (Piston Actuator)
Sizes - 1/2" - 2"
Control functions - Normally open, normally closed, double acting
End connections - True union, spigot, threaded or socket, flanges
ANSI
Body Material - PVC, PP, PVDF, NPP, CPVC, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM, CSM, NBR
Pressure(PSI) - 0-150
Control Pressure(PSI) - 45-90
Special feature - Manual override
|
 |
Type
604
Sizes - 1/4", 3/8"
Control functions - Normally open, normally closed, double acting
End connections - True union, spigot, threaded sockets
Body Material - PVC, PP, PVDF, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM
Pressure(PSI) - 0-90
Control Pressure(PSI) - 75-105
|
 |
Type
610
Sizes - 3/8", 1/2"
Control functions - Normally open, normally closed, double acting
End connections - True union, spigot, threaded or socket, flare
connections(HP), BCF(HP)
Body Material - PVC, PP, PVDF, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM
Pressure(PSI) - 0-90
Control Pressure(PSI) - 60-105
|
 |
Type
667
Sizes - 1/2"- 3"
Control functions - Normally open
End connections - True union, spigot, IPS threaded or socket,
flanges ANSI
Body Material - PVC, PP, NPP, CPVC, PVDF
Seal Material - EPDM, FPM, TFM
Pressure(PSI) - 0-150 (1/2-2"), 7.5-150 (2-1/2-3")
Control Pressure(PSI) - 30-90
|
 |
Type
690
Sizes - 1/2"- 4"
Control functions - Normally open, normally closed, double acting
End connections - True union, spigot, IPS threaded or socket,
flanges ANSI (not available for 1/2")
Body Material - PVC, PP, PVDF, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM, CSM, NBR
Pressure(PSI) - 0-150 (1/2-2"), 0-90 (2-1/2-4")
Control Pressure(PSI) - 45-90
|
|
*Pressure
ranges shown are for elastomer diaphragm/normally closed valves
*Pressure range will vary depending on seal material and/or control
function
*HP-Packaged and assembled in a Class 100 Clean Room Environment.
All end connections are capped. |
 |
Type
613
Sizes - 3/8", 1/2"
End connections - True union, spigot, IPS threaded or socket
Body Material - PVC, PP, PVDF, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM
Power supply - 24, 115, 230, 240V, 50/60 Hz
Pressure(PSI) - 0-90
|
 |
Type
693
Sizes - 1/2" - 2"
End connections - True union, spigot, IPS threaded or socket,
flanges ANSI
Body Material - CPVC, PVC, PP, PVDF, PVDF-HP, PFA-HP
Seal Material - EPDM, FPM, TFM, CSM, NBR
Power supply - 24, 115, 230V/50Hz
Pressure(PSI) - 0-150 (1/2-1"), 0-90 (1-1/4-2")
|
|
**Direct
application of 4-20mA control signals by means of additional module
*HP-Packaged and assembled in a Class 100 Clean Room Environment.
All end connections are capped. |
 |
Type
S560 Actuated Angle Seat Valve
Sizes - 1/2"-2"
Control Function - Normally closed
End connections - Union threaded or socket
Body Material - PP-GR, PP-FV, PP-GF
Fitting Material - PVC, CPVC, PP, PVDF
Seal Material - NBR, PTFE
Pressure(PSI) - 0-120 (1/2-1"), 0-90 (2")
Control Pressure(PSI) - 67.5-90
|
 |
Type
S660 Actuated Diaphragm Valve
Sizes - 1/2"-2"
Control Function - Normally closed
End connections - Union threaded or socket
Body Material - PP-GR, PP-FV, PP-GF
Fitting Material - PVC, CPVC, PP, PVDF
Seal Material - EPDM
Pressure(PSI) - 0-120 (1/2-1"), 0-90 (2")
Control Pressure(PSI) - 67.5-90
|
 |
Type
S670 Manual Diaphragm Valve
Sizes - 1/2"-2"
End connections - Union threaded or socket
Body Material - PP-GR, PP-FV, PP-GF
Fitting Material - PVC, CPVC, PP, PVDF
Seal Material - EPDM
Pressure(PSI) - 0-120 (1/2-1"), 0-90 (2")
|
|
*Other
fitting and seal materials are available upon request |